Printed from http://www.electronista.com

Liquidmetal inventor says Apple 'years' away from casings

updated 07:25 pm EDT, Thu May 3, 2012

Technology already in use on smaller parts

Dr. Ataka Peker, one of the inventors of the new class of metallic alloys known commercially as Liquidmetal and the founder of the company, says he believes Apple would have to spend "three to five years", and "$300 million to $500 million" to develop the alloys to the point where it could be used on a large scale, such as for an entire computing casing. He believes the company will continue to use Liquidmetal on a smaller scale until a "breakthrough product" comes along.


In an interview with Business Insider, Peker explains more about the substance, which is a group of alloys that have an atomic structure more like glass, giving them an amorphous quality. This means it achieves many of the qualities of other elements in one: exceptionally strong and corrosion-resistant like stainless steel, low-cost and able to be molded into complex shapes similar to plastic, and already smooth and beautiful like glass. Peker developed the original alloys along with his professor while a doctoral student at CalTech.

He describes the raw Liquidmetal material as being like stainless steel but with a slightly different tone and hue to the metallic gray, which can vary a bit depending on the specific alloy combinations used. One of its advantages is that it can be prepared in various cosmetic finishes, and is a "bit warmer to the hand when touching" compared to other metals, Peker says.

Apple is already using the technology on a small scale for things like the SIM card ejector pin found in the iPhone 3G, but Peker says the technology is still not "perfected" and is still to be matured both from a manufacturing standpoint as well as for practical application development, as the technology is "completely new and different" from metals and alloys currently in wider use. Apple, he says will have to spend hundreds of millions of dollars and several years' worth of time to develop the technology to the point where it could be used for large-scale commercial products.

Pekar says that as the technology grows, Apple would be more likely to use it for portions of devices rather than casings -- for example a hinge on the MacBook Air rather than the entire body. He says it is "unlikely" that Apple would use the material for the full casing in something like a MacBook Pro, since that would entail another few years of further development. Peker's view doesn't disqualify the material from playing a larger role in smaller devices such as the iPod or iPhone.

Prior to Apple obtaining the exclusive license, Liquidmetal was also used in other cell phones, such as "Nokia and Samsung flip phones," Peker said, implying that the technology was used for hinges. Apple has received patents for using the material to increase the natural cooling capacity of components, having bought the company and rights to Liquidmetal in 2010. Though Apple now controls the technology, the company is still manufacturing and shipping parts to other customers.

Peker says he expects Liquidmetal to evolve in two areas under Apple's control: "evolutionary substitution of current materials," in devices such as the iPhone, along with an eventual "breakthrough" product that could only be made using Liquidmetal technology, making it exceptionally difficult to copy or duplicate with other materials. [via Business Insider]




By Electronista Staff
Post tools:

TAGS :

toggle

Comments

    Comment buried. Show
  1. Arne_Saknussemm

    Forum Regular

    Joined: Apr 2011

    -11

    So it was all hype!

    Soooo Apple...

  1. smacker

    Fresh-Faced Recruit

    Joined: Apr 2003

    +8

    Did Apple...

    ... ever stated officially that they're going to use liquid metal in the next MacBook Pro or any other product? And if so, please provide a source. Thanks.

  1. DaJoNel

    Fresh-Faced Recruit

    Joined: Aug 2010

    +4

    Keep in mind

    It is only third-party rumors that are stating MBPs and iPhones will have Liquidmetal, not Apple.

    Also, other device makers are announcing products but then saying they'll come in 2013 or even 2014. That is hype. I don't believe Apple has ever done this.

  1. bowwowman

    Mac Elite

    Joined: Jun 2000

    -9

    idea

    Well here's a thought: Since it is "a bit warmer to the hand when touching"

    Maybe your momma can use it to build her next d**** out of and then point her finger at Apple and claim that they will soon release the next generation of "iPleasure" devices.......which of course will be connected to iTunes and will let you to listen to your favorite songs wirelessly while you grind your way to the ultimate "igasm" :) :) :)

  1. redcapzero

    Fresh-Faced Recruit

    Joined: Aug 2007

    +1

    proverb

    "Good things come, to those who wait..."

Login Here

Not a member of the MacNN forums? Register now for free.

toggle

Network Headlines

toggle

Most Popular

Sponsor

Recent Reviews

JBL Synchros E40BT headphones

For all the different configurations of headphones on the market, it's always a tough choice for buyers to get something that is just ...

Razer Taipan mouse

The list of gaming devices is growing larger with each passing day. A large number of companies have entered the gaming input arena, a ...

Cambridge Audio DacMagic XS

Every computer with a microphone or headphone port has one -- a digital to analog converter (DAC). There are nearly as many chipsets a ...

Sponsor

toggle

Most Commented

 
toggle

Popular News